1 / 7
Insta360 X5 with DJI Mic Mini belt carryon with stick
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insta360 X5 with DJI Mic Mini belt carryon with stick
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 104
- Wydruki
- 1
- Wyświetlenia
- 1113
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
Belt for carry Insta360 with DJI Mic Mini attatch to USB Port. It accept stick or without stick. Belt loop with gap, so you can take it out without needed to take belt out.
Wall loops: 4
Infill: 25-30%
Print on the side with normal support turn on.
I use ABS, but I think you can use anything, but if use PLA, you have to check your weather as you will likely using it outside in the sun which may cause PLA to deform.
UPDATE: Adding one with polygon to help with heat.