Ender 3 NG v1.2 - Orbiter v2/2.5 EBB46 Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
EBB42 mount for on the E3NG while having an orbiter v2/2.4
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 93
- Wydruki
- 1
- Wyświetlenia
- 776
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
BOM:
- 6x m3 heat inserts
- 6x m3 10mm BHCS
- 3x JST XH2.54 2 pins
- 2x longer screws for motor to attach to standoffs (i think m3 x 16 should do it, just a guess)
- about 3 zipties (if they even will fit rofl)
Instructions:
place heat inserts on all places like in the image above (IMPORTANT: if pictures arent changed, the standoffs dont need heat inserts and just will be directly screwed into)
insert the 3 JST connectors and connect them with a wire
mount cable attachment to the main mount
attach to toolhead base
mount EBB42 and ziptie the cables
make sure your extruder is positioned so the extruder cables come up at the top and not the bottom.
this is different than my current toolboard due to it be designed around the “v1.5 mount” i have been working on and will be updated to similair design.
25/05/2025:
changed standoffs to be directly screwed into instead heat inserts.
23/05/2025:
Fixed the wrong standoff layout due to the extruder being weirdly turned in all axis, and added a runout sensor version for shorter standoffs, compatible with a runout sensor easily bought online.