1 / 9
Wanhao Di3 v2.1 (monoprice maker select ...) E3Dv6 conversion kit
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
First export of my own setup, refined with time, this setup is working very well for me, including the fan ducts.…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
First export of my own setup, refined with time, this setup is working very well for me, including the fan ducts.
Feature highlight:
- TPU friendly, can print TPU at quite high speeds
- blower fan adapter for the E3Dv6, for a stronger cooling
- using 40mm rear fan acting as hotend & part cooling fan
- reuses original screws
- requires a shorter X belt, the tension is easier to adjust
- fully "open" so you see how the filament is pushed in real time
- easy to replace any J-head hotend, adapters provided so you don't need a screwdriver
Category: 3D Printer Parts