Gardena Water Sprayer Wall Holder/Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Never leave your water sprayer head on the dirty ground again!
- Ocena
- 5 / 5
- Polubienia
- 142
- Pobrania
- 310
- Wydruki
- 1
- Wyświetlenia
- 1289
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Never leave your water sprayer head on the dirty ground again!
This is an easy-to-print two-piece wall mount for the Gardena premium water sprayer (No. 18317-20) or Gardena comfort water sprayer (No. 18315-20).
The holder screws onto a bottom plate to keep the wall or surface dry. In case the sprayer is still wet when put into the holder, the model has a drain with a small lip (see third picture).
The main part can be printed without supports. The bottom plate needs little supports for the lid. Best printed with PETG for its water resistance.
I would love to see your makes! Happy Printing!