Seed Starting Trays and Transplant Spike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A set of seed starting trays inspired by the design sold by Epic Gardening, with an emphasis on printability.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 158
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
A full range of seed starting trays inspired by the ones sold by Charles Dowding and Epic Gardening.
I designed this set of trays from the ground up for 3d printing and made sure that all the overhangs were vertical enough to be easily printable on 3d Printers, and to use as little filament as I felt I could practically get away with.
There is a 16-Cell, 6-Cell, 4-Cell, and a single Cell (small pot) versions, that stack together nicely when not in use, and should all nicely fill up standard 1020 trays that are common with seed starting setups.
There is also a “Transplant spike” that fits onto the end of a standard broom or paint roller handle in the US (¾" Acme Threads). It can be used to punch a hole into the soil that is slightly oversized for the plugs that come from the 16-Cell tray for easy transplanting.
PETG, PLA+ or ASA is recommended for outdoor use, but standard PLA would be fine for indoor seed starting.