Deluxe sidewinder spool holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The smoothest spool holder for the Artillery Sidewinder X2 ;)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 66
- Wydruki
- 2
- Wyświetlenia
- 753
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Frustrated by the default spool holder and others I found I decided to design mine to overcome other design's issues.
This is the smoothest filament spool holder for Artillery Sidewinder X2 I've tested - it may work on other printers too.
You will need **4x 608ZZ** bearings (most commonly found) plus the metal rods and screws coming with the printer.
You need to print:
- 2x spool holder
- 4x spacer
Advantage of this design compared to others I found:
- adjustable tolerance by re-printing the spacers after adjusting the Z height (prints in a couple of minutes only, using little plastic)
- tight fit of the bearings (to glue needed, no wobble noise)
- no infill or support required
- no gluing of separate parts
- very little friction, unrolling of filament is butter smooth !