Vertical Stand for portable 14" Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a Vertical Stand for Arzopa 14 Portable Monitor that should fit most brands with an similar design.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
This is an vertical stand for the Arzopa A1 GAMUT SLIM portable 14" Monitor (the one with the flappy magnetic folio-stand).
The stand should fit many other models with the same design.
I've made an cutout for one of the USB-C Ports, to allow a single cable to be connected. A hole below the cutout makes plugging in the cable easy.
You either need an USB-C cable with an 90° angle connector or an 90° Adapter (like this one). The opening should be big enough for most common cables and adapters.
The fit is design to be very tight (due to the rubber feet), as I need it to be secure in place.
I've added another 3MF (Arzopa Screen Vertical Stand Loose Fit - with 192mm space) with the right wall pushed in by 1mm, so the display should slide in very easily - be aware, the F3D file is with the tight fit!

If you need the other usb-c port or the mini-HDMI port, you can just move the 18mm cutout in the CAD file… or add more, as HDMI alone won't get power. I won't judge ;-). I decided to go with a single port, for more rigidity, as that is what I needed.
Yes, it is overbuilt, and it much more material as is needed to archive this - but for my application, that was the design goal. the CAD file is included, feel free to slim it down as much as you want.