Better Replacement HyperX Cloud II Headband Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stronger clamps to replace the chincy stock clamps that break after a few months.
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 200
- Wydruki
- 1
- Wyświetlenia
- 618
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have made versions that use either the original screws or m3 screws, and another variant that will accept threaded inserts. Either button head or flat head m3 screws will work. The screws should fit correctly with 0 XY size compensation, at least it does on my printer.
‘HyperX Clamp Back.stl’ is meant for either the original screws or 8mm m3 screws
‘HyperX Clamp Front.stl’ is meant to either have the original screws or have m3 screws threaded directly into the plastic.
‘HyperX Clamp Back 12mm M3.stl’ is made to accept 12mm M3 screws, this can be used with other the regular or threaded insert version.
'HyperX Clamp Front Threaded Inserts.st' Has enlarged holes that will accept threaded inserts.
Personally I went with 12mm screws with inserts, partly because I lost one of the original screws and to make a far stronger connection than the original hardware. I just made the other versions to allow for more options for anyone that wants them.
V2 added: Tightened up and curved the slot for the speaker bar, this allows for smoother adjustment and makes it less wobbly. V1 was made match what others have published but I couldn't accept the poor fitment, as such it has been removed.