1 / 6
Protection caps for stop ruler of Festool Multifunction table MFT/3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protecting the ends of the stop ruler of Festool Multifunction table MFT/3
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
First I tried to use this but it does not fit the stop ruler of the Festool Multifunction table MFT/3 I received in april 2025 (width = 52 mm / left height = 20 mm / right height = 12 mm).
So, I designed a new version that fits perfectly.
There are two protective caps included:
- Right side (R): Prevents accidental cutting of the aluminum stop ruler when making angled cuts (other than 0°).
- Left side (L): Helps avoid those painful thigh bumps against the stop ruler — you know how much that can hurt!
I have also included the STEP files.
Print tips
I have successfully printed the protective caps with following configuration:
- Printer: Prusa MK3S
- Filament: Prusa PLA
- Print settings: 0.20mm SPEED without support
- Infill: 15%