1 / 3
Snap-on Wire Mesh Chair for pouring reinforced concrete
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frequently used sizes of chairs for pouring 10-cm (4-inch) and 15-cm (6-inch) slabs of reinforced concrete.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
These are useful when you need to pour concrete in tight spaces, where laying chairs down first and placing the mesh on them afterwards is complicated. Snap them on first, and then drop the whole segment of mesh in place in one go. Four typically used combinations are available:
| 10-cm (4-inch) slab | 15-cm (6-inch) slab | |
| 4-mm wire | ✅ | ✅ |
| 6-mm wire | ✅ | ✅ |
As a rule of thumb, the chairs should be about half as high as your slab is thick, so that the wire mesh ends up in the middle.
You can easily print a bunch at once, as the attached gcode demonstrates.