1 / 2
48.3mm elbows 30 45 90 | Zecior Prototype Intake System — zdjęcie 1
1 / 2

48.3mm elbows 30 45 90 | Zecior Prototype Intake System

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Elbows 48.3mmx3mm used to build the intake puzzle

Ocena
0 / 5
Polubienia
9
Pobrania
35
Wydruki
0
Wyświetlenia
299
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Elbows 48.3mmx3mm used to build the intake puzzle, (as that common elbow, and internal size fits perfectly to b5234t3 flange) the fit may vary slightly depending on the printer and calibration you use, so I bit increased  it. so i recommend using a piece of paper and then it fits very tightly (fitment 0.13mm per side) if will not fit ideal

Tagi