1 / 4
Retro PC Case Pencil Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Retro PC Case Pencil Holder
- Ocena
- 5 / 5
- Polubienia
- 169
- Pobrania
- 535
- Wydruki
- 3
- Wyświetlenia
- 2283
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 5)Remiksy (1)Kolekcje (191)Powiązane
Retro PC Case Pencil Holder
Filament Used:
Printer Settings:
- Print Time: 3h 48m
- Add supports on the flat overhangs
- The insert STL is to raise the items placed inside the top of the PC Case. They may sit too low without it so the insert is optional. (The insert is used in pictures).
- .2 layer height
- Print Temp: 230°C
- Bed Temp: 60°C
- 240mm/s
STL designed by dsk001_3d