Skateboard & Skateboard Mold Design
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A skateboard & the mold to go along with making it!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 92
- Wydruki
- 0
- Wyświetlenia
- 327
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a skateboard mold I designed around a 8.25" wide board with a 15 degree front and back kick angle. There are multiple files included depending on your need. I have cut the mold into pieces and used a bow tie joint to connect them together so it can be printed on small printers. I have also included the full size molds so you can slice it as you see fit.
In theory, you would glue this to a board and clamping device. This was designed sometime in 2018, and I have the original files… but I don't have that modeling software anymore to make changes. It seems there are better websites to use to develop molds nowadays anyways. There are also a few YouTube videos on 3D printing these with good results. I never got around to building the complete mold, but I did print pieces.