Aiper Scuba SE Fin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An addon to the water jet fins for the Aiper Scuba SE to change it's cleaning pattern.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 95
- Wydruki
- 2
- Wyświetlenia
- 760
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
In an above ground vinyl pool with curved bottoms the Aiper Scuba tends to get stuck bouncing between the same walls, if this happens with your pool and Aiper print 3 of these and stick on ONE of the outlet ports for the water jet, these fins will force the water to exist at a slight angle which will force the aiper to turn and get out of a fixed pattern.
Don't put it on both ports, you want one of them to blow water straight out.
(Pools with hanging vinyl liners, you will probably not have the same issue on regular pools or vinyl pools with steel walls that gets a 90 degree corner between floor and wall).