1 / 1
Carvera Bit Organizer for Honeycomb Storage Wall
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the small Carvera bit organizer with a 22.5 degree lean and mounts for the HSW (90* rotated mounts)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I printed this upside down using a 10% gyroid infill and tree supports only on the build plate and only with critical regions supported. I set the bridging to 10mm so it wouldn't put supports into the bit squares and they still printed perfectly!
