Nerf Half Length Mag-fed sabot APFSDS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reloadable Magfed abled nerf halflength APFSDS
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 100
- Wydruki
- 0
- Wyświetlenia
- 808
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
A Reloadable magfed-enabled version of the original by MZ72.
PLEASE DO NOT FIRE AT ANYONE
1 shell 12.5mm
1 full print sabot (didn't test much, tell me how it goes)
1 alternate sabot fins (toothpick, or whatever else is that diameter)
Print upright 0.1mm quality 100% infill.
Use a bit of hot glue to secure the two shells together from and only the bottom.
Then flex the shells 180 degrees to loosen the hot glue so the shells can split when fired.
Quality Check: Ensure the shell can comfortably move through the barrel before firing.
Fires well up to 15 meters (haven't tested anywhere further)
Beware of printer squish and stringing, as this has a troublesome record of getting stuck in the barrel.
I have only tested this with the Harrier Blaster with the Talon 5-round magazine. I am not sure of its performance with other blasters or magazines.
share if you make id love to see it