Belt Deflection Tester for conveyor-belt printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is designed to test how hard it is to lift up or bend part of a belt on a belt printer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 436
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Print this part in any material that sticks strongly to your printer's belt. Infill and layer height do not matter - I printed mine as fast as I could to get the tests out quicker. This is not designed to test belt adhesion - it's designed to stick well to the belt so that you can pull the top of the part and measure how much the belt bends.
To use, I recommend a 50N digital force gauge - but any force gauge should work. The maximum force your belt can take before deflection is the number I'm trying to measure.
I will be comparing my various beltprinters and also new ones coming out, while working on ways to lower belt deflection and make beltprinters even more awesome!
I made a video partly on the design and usage of this part - skip to 10:19, the previous chunk is on belting out my large belt ejector:
This work is part of the PrintShift project, trying to add part ejection to 3D Printers.