POLE_CONNECTOR_16mm

If you like what I do here, come visit my Facebook group.

3D printed Grow Tools & Accesories - free .stl


the “POLE_Connector”

- made for 16mm growtent poles (steel)
- for use with MXG_2

what u need:

M6 threaded rod 120mm (or longer)
M6 nuts


printsettings:

print it with 100% infill 


assembling notes:

- measure the distnce between your poles if the sleeve is removed
- edit POLE_CONNECTOR_SPACER.step (or .stl with your slicer) to the length uve measured
- assemble parts as shown
- fit all into the poles and turn the poles aiganst another

for disassembling:

- turn them in the other direction until u see a gap of around 5mm
- push te poles together until “klick” after that u can easily remove the first pole
- push the threaded rod into the remainin pole/dowel until it klicks
- pull out the dowel 





I hope you will enjoy it & stay green !


most product links are supported by affiliate marketing



If you appreciate my designs and would like to support my work, you can do so by buying me a coffee. Your support means a lot!


This 3D model is the original intellectual property of Andreas Marx and is protected by copyright laws. You are welcome to download and print this model for your own personal use. However, any other activities such as altering the design, selling the model or its prints, or using it for commercial purposes is strictly forbidden without receiving prior written consent from the creator.