Flashforge Adventurer 5M (AD5M) - filament sensor support - correct direction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional support for proper installation of the filament sensor
- Ocena
- 0 / 5
- Polubienia
- 52
- Pobrania
- 662
- Wydruki
- 0
- Wyświetlenia
- 3032
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Once I printed XTRUD3D's chain for the Flashforge Adventurer M5 I realized that the filament sensor could not work in the correct way. So I created this additional holder for the filament sensor.
Placed vertically, the sensor maintains the same direction of filament entry and exit as in the original position.
You will need:
- 2 M3 nuts
- 2 M3 x 20mm countersunk head screws ( sensor )
- 2 M3 x 10mm countersunk head screws ( holder )
If you have difficulty inserting the nuts, heat them with a lighter and they will fit perfectly in their seat.
The bracket mounting holes I preferred to countersink them later 3D printing.
The recess of the screw head on the bracket can be made with an iron drill, turning anti-clockwise.
----------------------------------------------------------------------------------------------------------------
If you found this project useful please consider giving me a coffee. Thank you !
PayPal Tip Jar: https://paypal.me/jackala396