Box for Ruthex soldering iron heat-set insert accessories
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A latching box that will hold a Ruthex TS100 / TS101 / PINECIL soldering iron tip together with a set of M2-M8 adapters.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 37
- Wydruki
- 1
- Wyświetlenia
- 255
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
An implementation of my parametric latching box, with a custom insert for Ruthex soldering iron accessories. You can read some of the design considerations that went into this design in this blog post.
Print settings:
- Material: any. I print mine with PLA.
- Layer height: 0.2 mm for the box. Smaller if you want the writing to look good. If your slicer and printer support it, I've found that adaptive layer height with the maximum quality preset looks best.
- Orientation: everything flat on the plate, including the latch.
- No support required.
Note: The expected diameter of the hinge and latch pins is 2 mm. I make mine this size because I happen to own a lot of old steel bicycle spokes, and those are usually 2 mm in diameter, and perfect for this use case. If you want to use another size, you will have to download the Fusion file from the parametric model and update the hingePinDiameter and latchPinDiameter parameters respectively.
IMPORTANT: It goes without saying, but please don't put the hot tip or adapters back into the box before they have cooled!