Washer/Dryer Laundry Rake/Hook/Grabber - Assistive Item
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use this when laundry in a front-load machine is hard to reach.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
A minor issue with front loading washers and dryers is that laundry at the back of the tub can be hard to reach, and for persons of a certain age this can be quite difficult (or for anyone else who may have difficulty bending and reaching). This simple “rake” makes it easy to reach the back of the tub and pull laundry forward within easy reach.
Additional part required :
- ½" (12.8mm) wooden dowel, approximately 24" (60cm) in length
- Note : Use length appropriate to the depth of your laundry tub
The ½" diameter for the dowel is not critical, and the parts can be scaled to fit other diameters (such as metric sizes). For scaling purposes, I have included a "test socket" part which can be scaled and printed quickly to test the fit. Since wooden dowels are not precision items in any case, I recommend print the test piece first in all cases.
Assembly and Use
Assembly is simple - print the parts and insert the handle and rake on either end of a length of dowel. The pieces will be a firm fit (no glue required).
The handle part is really optional, but I find that the handle makes for a better looking item, and also feels more comfortable in use.
Print Instructions
Print in PETG (PLA should work also) using the 3mf files provided, otherwise :
- 0.2mm layer height
- 4 perimeters
- bottom 7 layers
- 15% grid infill
CAD
The OnShape 3D CAD files for this are here :