Lighted Display Case for Miniatures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 3d printable version of the Artist Opus style miniatures display case in an 8x10" size.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 689
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was impressed by the Artist Opus model display cases, but wanted something that better fit my space. These are based on a generic 8x10" picture frame that costs about $1 each. You will need to cut the glass yourself for the shelves or have a local hardware store do it. You need two at minimum, one for the front glass and a second for the shelves. I designed it to support glass or acrylic shelves up to 4mm thick. The thicker shelves catch more light and give a better presentation, but the material may not be available to everyone.
picture frame - https://www.dollartree.com/special-moments-black-angled-picture-frames-8x10-in/245560
The frame is presented as a single piece for a 300x300 printer or larger. I have included channels for 3mm rods if you want/need to split the print for smaller printers. I recommend using a higher infill to eliminate any sagging.
3mm rods - https://a.co/d/1nFqwDz
Use standard high-density LED strips for the best light coverage. I used a WLED-compatible controller with my displays.
LED Controller - https://a.co/d/aBir5bF
LED Strip - https://a.co/d/6PlnWQ7
I also included options to add drawers and a version that is all drawers.
The face frame is held on with 16 6x3mm magnets.
Magnets - https://a.co/d/gueCH3J
Currently, it is set up as a shelf mount display, but I will offer options for wall mounting in the next update and possibly more sizes.