Cubicle 8"/200mm shelf bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelf bracket for attaching to cubicle wall slots. 180mm or 7" wide bracket for a 200mm or 8" shelf.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 65
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Shelf bracket for cubicle walls. Top dimension is 208mm or 7". I use it to hold an 8" wide shelf.
(not sure exactly what brand of cubicle, but will post it later if someone has the info!)
Since the connections happen at the edges of the wall panels, a separate L and R side bracket are needed. The center bracket can use a thicker version, so that's available too.
Needless to say, but DON'T go printing this with 1% infill and 1 wall and then put your gold bars on top. No testing has been done regarding the strength nor longevity of printing in PLA.
CAD files available on OnShape!