Circle Pen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Circle keychain pen with BIC refills
- Ocena
- 4,739 / 5
- Polubienia
- 241
- Pobrania
- 1604
- Wydruki
- 23
- Wyświetlenia
- 6735
- Oceny
- 23
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
After looking at all the designs in the contest I just wanted something with a different shape and came up with this circular design. I think it would be a nice addition to your keychain.
You'll find two designs here…
- The first ( a "circle" ) one with one BIC pen cartridge
- The second one (an elongated circle ) with two BIC pens cartridges for two different colors.
Print Settings
I always use PrusaSlicer settings as a start point and tweak some parameters based on the filament I use or characteristics I need from the final print.
For this one, I used 0.2mm default settings with 5 perimeters for better print movement and speed. You may have to change the flow rate of your printer to find the best fit for the BIC refills
No need for support on this print.
Additional material
You will need one or two classic BIC pen cartridges.
Assembly
All the assembly is pretty straightforward. Just put the BIC pen cartridge inside the pen holder till the end. That's it!
For any questions feel free to contact me in DM's or comment on the print page! I'll be happy to answer all your questions and make some modifications if you want!
Happy printing and remember… “Life is a prototype”