Gidfinity potentiometer storage and sawing guide for piher T16SH-M04 potmeters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 4 by 4 gridfinity bin to store Piher T16SH-M04 type potentiometers, and to act as a sawing guide to shorten the shaft.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Public Domain
Compatible with piher T16SH-M04 type potentiometers
Systeemborden are pieces of learning material very often used in Dutch middle school's science lessons. When potentiometers need to be replaced, the shafts need to be shortened.
I made this gridfinity bin to store potmeters for systeembord repair, and to function as a sawing guide to cut the shafts at the required length.
I uploaded this for Dutch science teachers, and for anyone else that seeks to store or shorten their potentiometers gridfinity style.
This bin should be printed with some detail. I used a 0.4 mm nozzle, 0.45 mm line width and 0.1 mm layer height. It took 13 hours to print on my mk3s. You could probably get away with a larger layer height and get it printed way under 13 hours.
I printed with PLA, because it is easy and cheap and good enough, and PETG is more prone to stringing. This is a really tight fit, and I didn't want to risk even minimal stringing to make my part useless.