1 / 3
Replacement Fin for VAH Wiki Crossbow Bolts (8 mm Shaft)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Fin for VAH Wiki Crossbow Bolts (8 mm Shaft)
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Unfortunately, the original suction-cup bolts for the VAH Wiki crossbow (26 cm length, 8 mm shaft) tend to break quite quickly under heavy use—at least with my kids 😉. Without the fin, the bolt no longer locks into the safety mechanism and can’t be fired. Replacement fins aren’t sold separately, only complete bolts. That’s why I designed this 3D-printable fin: just print it, press it into the shaft, reattach the suction cup—and you’re ready to go. Repair your bolts in no time and keep on playing!
➤ Recommended Print Settings
- Material: PLA or PETG
- Layer Height: 0.1 mm
- Wall Loops: 4