M920 - CPU Cooler for 80mm Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a CPU cooler for the Lenovo M920 for 80mm Fan
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 843
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I designed a air cooler for my M920p that supports a 80mm fan. it does a decent job of directing airflow through the CPU cooler. there is also a cut out in the bottom to introduce some airflow through the motherboard, because I realize through testing that it got pretty warm. But that also makes sense if you look at the original air cooler.
------------ Parts -------------
it uses: it uses 1 - 3M screw minimum length 5mm
if you have some screws from a old motherboard. that will work.
--------------------------------
this AirCooler was designed for my Lenovo M920 - Two slots GPU - 3D Case Model - Artistic Sci-fi Design
link here if interested: https://www.printables.com/model/1304395-lenovo-m920-two-slots-gpu-3d-case-model-artistic-s
But realized that it can also be used for other Cases. so I made a separate Model Page, if it is you need a CPU Cooler for your project.