1 / 4
Rift: Genesis - Bobblehead
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a little bobblehead from the (unreleased as of 5/23/2025) game Rift: Genesis, by Carbon at tNP. Studios.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 1
- Wyświetlenia
- 59
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just Rift Guy from Rift: Genesis, Alpha Build 7. Some of the pictures are from an older version of this model. Game and IP belong to Carbon of .tNP Studios.
Be careful when removing supports.
Tips:
- Print the spring flat on its side. It seems obvious but I've seen some people do it vertically.
- The helmet orientation is the only one that really matters. Print it upside down for an easier time inserting the spring, at the cost of the top looking worse (unless your printer is really good).
- The spring may need a drop of super glue to stick. If you print the figure and spring at 66.6% size, it might press fit, but then the spring might break.