Endcap for PV-Profile 40x40 mm²
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Endcap with tight fit for 40x40 mm² aluminium PV-profile.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 252
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
For my Balkonkraftwerk mounting rig I received end-caps for the PV-profiles that would inevitably collect water if mounted on the lower end - so I designed my own. They should be printed in PETG to keep their shape on hot summer days. Tolerances should allow for a variety of profiles, while the clamping feature holds the end-cap in place.
PV-profiles seem to come in all king of variations. In case the end-cap geometry does not quite fit your specific profile, the FreeCAD file is included as a base for modifications - please do not hesitate to share your remix. There's also a simpler shape (v1) without the clamping feature.