2" Prop Fishing Lure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Based on the Heddon Torpedo and Designed in Fusion 360
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 604
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 2" prop lure based on the underrated lure called “The Heddon Torpedo”. It is meant to look sort of like a frog on top of the water. This lure is a better alternative to a whopper plopper in my friends opinion, so I designed this lure to test it out myself and I decided to share it with you.
Print Settings
-Infill:3-10%
-Layer Height: 0.1mm
-Perimeters: 3
-Supports: Yes, Organic, On Build Plate Only
The Prop named (HEAT) is the prop that is designed to be moulded with a heat gun or lighter but be careful. Also, as with all my designs you will need to have screw eyes or make twist wires. This model is designed for 18 gauge wire but I like to drill out the holes after printing anyways.
Thank you for considering printing and hope you have a good day!