Simply the coolest toothpaste dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A toothpaste tube holder that is so cool and convenient
- Ocena
- 3 / 5
- Polubienia
- 9
- Pobrania
- 41
- Wydruki
- 1
- Wyświetlenia
- 535
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Glue this holder to the wall, screw your toothpaste tube in it and enjoy !
The tube will be held at the perfect height, no need to leave it on the side of a sink.
Grab the tail end of the tube and lift it to flip it upside down. The lid of the holder will open as you do so, leaving you plenty of room to get toothpaste on your toothbrush. Once done let the tube down so it comes to hang from the holder and the lid will come to cover the hole of the tube.
No supports are needed
I used a section of 2mm thick rod to connect the lid to the plate. A piece of filament would work too.
The screw plate gets inserted into the back plate by gently and carefully spreading the brackets of the back plate.
This holder got me started on designing similar systems for soap and dish washing liquid holders. Go check them out !