1 / 4
Carabiner Suspension Clip/Deep Pocket and Belt Keychain Holder — zdjęcie 1
1 / 4

Carabiner Suspension Clip/Deep Pocket and Belt Keychain Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This loop or carabiner holder works on the belt, and as a deep pocket keychain suspension clip.

Ocena
5 / 5
Polubienia
141
Pobrania
537
Wydruki
7
Wyświetlenia
3738
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution

Updates

  • 2023/2/2 Added 10mm thick versions per request in the comments!
    • Pocket.Belt.Carabiner.10mm.3mm.Short
    • Pocket.Belt.Carabiner.10mm.5mm.Long
  • 2023/2/8 Added 10mm and 6mm thick versions with a simple clip instead of a carabiner per request
    • Clip.Loop.10mm
    • Clip.Loop.6mm
    • Clip.10mm
    • Clip.6mm

Summary

This allows you to carry keys or any other items that fit on a keyring either on your belt, or as a deep pocket carry. The carabiner version allows for quick release. 

Features

  • Loop and carabiner versions for quick release: the loop version is simple, it has a loop for your keyring! The carabiner is for quick release, and also features a barrier to help keep your keyring at the tip of the holder.
  • Different thicknesses for more robust/discreet carry
  • Different lengths for lower/deeper carry
  • Set optional layer colors to distinguish your different holders! If you have a MMU2, you can also print different colored layers to help distinguish the holders and what items are connected.

Print Settings

  • Material: PETG (tested)/ PLA (untested but should be fine)
  • Layer height: 0.3mm is fine
  • Supports: none

Other Notes

I personally use different holder for different keys and tools. One of my thinner versions is for my office keys, a thicker version is for my Victorinox Swiss Army knife (Compact). Yet another carries a Victorinox Minichamp.

Carabiner version after printing my need a little twisting to get the carabiner to open. Shouldn't damage your print.

If you need other thicknesses or lengths, let me know and I'll try to make it for you.

This is a remix of a design I can no longer find, which originally was on Thingiverse I believe. I improved the hook retention, optimized thicknesses, and added a carabiner feature.

Tagi