1 / 4
Lowrider 3 - 4" Dust Collection
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust collection attachment for the Lowrider 3 designed to support 4" overhead dust collection hose.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I really didn't like that I had a dust collector but I couldn't use it with my CNC machine, so I designed a 4" hose mount for the Lowrider 3. I went through quite a few versions before getting to the current stage.
There are three pieces to the modification, no new hardware is required.
- The router base plate has new additions on each side that accept a clip attachment. This attaches uses the existing hardware and replaces the original base plate. This is a remix of the original vacuum hose base plate.
- The hose mount clips onto the modified base plate and allows for a 4" dust collector hose to be attached from above.
- The bottom scoop clips into the hose mount and really locks everything in place while also directing the suction towards the bit.
Note: This solution is designed to work with overhead dust collection.