GEPRC Cinelog 30 v3 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case made specifically for the GEPRC Cinelog 30 v3 with antennas still attached and a battery ready to go.
- Ocena
- 4,667 / 5
- Polubienia
- 18
- Pobrania
- 295
- Wydruki
- 3
- Wyświetlenia
- 1141
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Custom-fit protective case for the GEPRC Cinelog 30 v3 cinewhoop drone. Designed to store and transport your quad with antennas still attached and a battery mounted—no more bending antennas or removing your battery every time you pack up. Grab and go.
Features
Antenna-friendly design – Internal clearance accommodates mounted antennas
Battery-ready storage – Keep a battery installed on the drone while stored
Secure latch system – Lid locks with two M3 x 16mm bolts for a snug closure
Two wall thickness options – Standard and thin (2mm) versions available depending on your durability vs. weight preference
Print Settings
Material: PETG recommended for durability and slight flexibility
Supports: Recommended for two curved edges at the bottom of the case
Layer Height: 0.3mm
Infill: 100%
Hardware Needed
2× M3 x 16mm bolts (for lid latches)
Changelog
Dec 18, 2025 – Added thin 2mm wall thickness version; fixed overhang issues by removing problematic radius
Jan 1, 2026 – Fix missing latch