TF2 Sniper Rifle (Nerf blaster mod from Mighty Shrub's SMILEY)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Nerf blaster remix of the SMILEY by Mighty Shrub, with the cosmetics of the TF2 sniper rifle.
- Ocena
- 0 / 5
- Polubienia
- 106
- Pobrania
- 256
- Wydruki
- 1
- Wyświetlenia
- 3657
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you want to buy me a coffee :) https://buymeacoffee.com/methanejuice
20250531 Update
Added a mag insert for single-round reload
My build is using Sillybutts Brassless breech, and the better printing ram base. This should follow most of the build guide for SMILEY blaster.
This uses most of the hardware in the kit, plus some extra:
#6 30mm screws QTY ~14 (for stock panels)
M3 10mm countersunk (or #4 x 0.375in Thread-Forming Flat Head Screw) QTY ~20 (for attaching scope, grip, lid)
M3 x 40mm button head screw, QTY 3 (for attaching scope)
M3 x 15mm button head screw, QTY 1 (or just use #6 8mm screw Qty2) (for attaching fake range finder)
M3 nuts QTY4 (for attaching scope)
And a short section of elastic for attaching the scope lid
Barrel extension I use an Aluminum round Tube, 32mm OD 29mm ID 300mm long
The scope requires some glue
Not included but also needed to be printed are:
Bolt Grip_SMILEY v4
Catch_SMILEY
Bolt Arm R_SMILEY
Bolt Arm L_SMILEY
Bolt cap_SMILEY
Plunger Head
Trigger Linkage_SMILEY
Spring Rest_SMILEY
Bolt_SMILEY
Trigger guard_1_SMILEY (or Trigger guardR)
Trigger guard_2_SMILEY (or Trigger guardL)
20250525 Update
Scopte too heavy, add something to (is Scope mount_FR) prevent slipping.
