AtomRC Dolphin ESC heatsink scoop base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapts Aspir3's ESC v12 cover to scoop airflow through an ESC mounted heatsink
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 141
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An air-scoop / heatsink-mount combo for use with Aspir3's excellent AtomRC Dolphin ESC v12 cover - https://www.thingiverse.com/thing:5147951
Sealing the edge of the heatsink to the base with epoxy creates a watertight ESC cooling solution. Very handy when landing in wet grass.
This model provides a keyed, retaining mount for:
- TBS Lucid 12S 90A ESC - https://www.team-blacksheep.com/products/prod:tbs_lucid_12s
- TBS heatsink - https://www.team-blacksheep.com/products/prod:dp_heatsink
Fitment into the AtomRC Dolphin ESC bay requires removing the stock wooden liner, and carving out the foam to deepen the bay with a craft knife.
The part is keyed to fit the TBS ESC, and the scoop slope matches the intake/exhaust of the Aspir3 v12 cover. The mounting hardware used is supplied with the heatsink.
Recommended mounting the heatsink to the ESC with an thermal pad to make good contact with the ESC MOSFETs. A Raspberry Pi 5 heatsink pad is a closely-sized fit if you want a pre-cut option for this.
Pre-wire the ESC, and friction-fit or glue this base into the ESC bay. The separate Aspir3 ESC cover then mounts directly on-top to sit flush with the lower surface of the fusalage.