1 / 1
64 Tooth gear for Atlas Craftsman 109 lathe gear train — zdjęcie 1

64 Tooth gear for Atlas Craftsman 109 lathe gear train

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

64 Tooth gear designed for Atlas Craftsman 109 lathe

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
0
Wyświetlenia
192
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

With the older Atlas Craftsman 109 lathe, to machine certain thread pitches, 2 64 tooth gears are needed. The lathe I got only came with one 64 tooth gear (bought 2nd hand) so I printed another gear out of Glass Fiber Nylon filament (Onyx by Markforge). Any engineering grade filament will likely hold up well, I would recommend Nylon for it's low Coefficient of Friction and high durability. It has been holding up great. 

I finally have all the tools and means to make my own gear cutter and with my other uploads of 32 hole dividing plate for Spindexer, I can make 64 tooth gears. Eventually, I will make a proper aluminum gear to use, but will wait until this printed one fails. As of now, it's been in the lathe being used for a couple of years now and still going strong.

Tagi