1 / 4
60º (or other angle) pipe cutter template for 32mm (and any other diameter) PVC (or other material) pipe.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The model is parameterised, so any (reasonable) angle and diameter will work just fine.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to cut a few pieces of PVC in different angles, other than the more common 45º or 90º fits. So I (slightly) overengineered a model for various angles and diameters.
Print recommendation:
- 3 walls
- Infill: (Support) Cubic infill of around 12% will be rigid enough
- Supports: None needed (droplet design)
- Brim: Depends on your build plate, I didn't use any
- Material: Any stiff material will do, I used PETG, but PLA will do equally well.
- Line height: Depends on your nozzle, I used 0.24
Note: On the photo I have the saw-slid orientated at a different angle “\”, this complicated sawing, so I flipped the opening “/”. This also works better for both left- and right handed sawing, because the saw now moves away from the table. The version uploaded saws away from the workbench.