VAG / VW Rear Hatch Bump Stop Rubber Dampener Replacement for part 6Q6827499C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement rubber dampener for the hatch bump stop in VAG (VW, Skoda, Seat, etc) cars.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 3
- Wyświetlenia
- 136
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Many VAG cars from (VW, Skoda, Seat) have a bump stop to keep the rear hatch firm without creating rattling noises while driving. With my Polo V, I was wondering where the noise was coming from until I saw that on one side the rubber was missing. You can only get the whole bump stop as a replacement, costing 17€. The original part number is 6Q6827499C.
Print using medium soft TPU. I only had hard TPU, but it worked as well. I printed it without supports, despite the warnings. It still printed OK.
You should not need to detach the whole bump stop from the hatch. But in case you want to, turn it 90°. If you need to adjust the length of the bump stop, unscrew the grub screw in the middle (4mm hex) and pull/push it. Then tighten the screw again.