Replacement knobs for Nichols Electronics ice cream truck music box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement song selector and volume knobs for the Nichols Electronics Digital II music box
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
I got a used Nichols Electronics Digital II music box, but it was missing the knobs. These are replacement knobs based on the dimensions of the knobs I had on my Nichols Electronics Digital.
You will need a printer capable of dual extrusion for this. It needs to be printed in a filament which can withstand vehicle temperatures if you're going to actually use this in a vehicle. I used Atomic Filament Metallic Silver PETG for the outer ring and (IIRC) eSUN Black PETG for the centers. When printed correctly, the knobs are a press-fit on the shafts. The outer ring is the same for both knobs, but the black center part is different - the song selector shaft is keyed. For a closer matching texture, be sure to print the top layer of the center using Hilbert Curve infill and use Archimedian Chords or similar for the outer silver ring.