Dyson DC41 Canister Release Button (top piece)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement release button for the Dyson DC41 canister
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 39
- Wydruki
- 1
- Wyświetlenia
- 147
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
I have a Dyson DC41 Animal vacuum cleaner. I like it because I have 2 dogs and it works great on dog hair. However, the plastic piece used as the release button for the canister, has broken twice. That little plastic part is sold in the UK, but not as easily available in the US (though you can find it on EBay for about $16). The first time this broke on me, I ended up buying a whole new canister for $50+.
I decided to try my hand an modeling a replacement myself using OpenJSCAD, and this is what I came up with. I tried to make the area of the top section of the piece (where the breaks occurred on the original part) a little more robust.
This may also work for the DC43 as well, but I don't have that model to verify that.
Recommended settings:
- Supports: Yes
- Resolution: 0.15
- Infill: 100%
Notes:
Due to the stresses put on this part during normal use, it is best to have this oriented on its side. Recommend PETG or ABS for strength.
Note that because of the complexity of this part and the way in which is should be oriented for printing, there will be a lot of support material. It is admittedly a pain to deal with and care must be taken when removing it.