Scrolling Desktop Scratch Paper Dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows an unbroken desktop canvas for sketching and doodles.
- Ocena
- 0 / 5
- Polubienia
- 35
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 498
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a fully 3D-printed “perpetual scratch paper system” It's mounted to the underside of my desk and provides a continuous surface for scribbling and sketching. Whenever I need a clean spot to write, I just reach down and turn the crank. New paper unspools and slides up across the desktop, while the used paper feeds down and wraps neatly onto the take-up roll below. (paper can be run forwards and backwards)
Mechanism in action: https://imgur.com/a/scrolling-desktop-scratch-paper-4DYgpSG
Base plate mounted with 4 recessed screws each, the rest of the assembly slots in via dovetail connections. The mechanism locks in place with four printed thumb screws
Designed to fit 1 inch diameter tubes of kraft paper rolls, but could be adapted to fit other tube diameters, and lengths.
Printing:
- Nozzle size: 0.4 mm
- Layer height: 0.2mm
- Supports recommended
Parts List: (For full mechanism)
- Mounting bracket (Ratchet side) 2x
- Mounting bracket (Blank side) 2x
- Mounting plate (threaded) x4
- Tube gripper x4
- Ratchet tooth x2
- Torsion Spring x2
- Spring cap x2
- Base lock screw x4
- Tooth lock knob x2
- Hand crank x2
- Hand crank ball x2
- Retaining ring x2
- Empty spool A x2
- Empty spool B x1