1 / 4
Laptop and Tablet Mount under Table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount under table/desk that has 3x sections to hold Laptops and Tablet + additional section for smaller things
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 216
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v3.0
This is a model that was designed to hold one 14 inch laptop one 16 inch laptop, and a 13 inch tablet. But it can hold bigger laptop than 14 inch, max of 16 inches. Here is an overview of what this model is able to hold:
- 16 inch laptop(max value. Can hold smaller laptop),
- 16 inch laptop(max value. Can hold smaller laptop),
- 13 inch tablet (max value. Can hold smaller tablets)or smaller and smaller tablet than 13 inch too.
- +one small section to hold something
This mount is attached under the table using 8x M4 screws.
Recommended Settings in Slicer Software:
- Precise Wall: True
- Walls printing order: Outer/Inner
- Sparse infill density: 10%
- Sparse infill pattern: Gyroid
This model will take approximately 15h 54m to print and will use 559.76g of Filament
I will appreciate it a lot if you will leave a comment or make a photo of this model once printed and post it here :)