Nitrate 28 (N28)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a subcompact mini angled talon fed nerf stringer that is based on the Glock 28 gen 4
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 516
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
********This Blaster is intended to look like a real firearm, I highly recommend using a orange muzzle device********
UPDATES:
5/27/2025-removed faulty trigger spring, fixed slide tolerances, fixed mag indent
(this blaster has no slide return system and no attachment barrel due to trying to be as compact as possible)
Hardware Required:
-2 M3x15 bolts
-1 Small bungee chord
Recommended Print Settings:
Filament:
PLA (different settings are needed for different filaments).
Supports:
yes.
Rafts:
no.
Brim:
highly recommended for printers in nonstable temperature climate, otherwise no
Infill:
20%+
Print Bed Size:
180mm in length at least for printing properly.
**THESE MODELS ARE NOT MEANT TO COMPETE, OR COPY THE PRODUCT THAT THIS MODEL IS BASED OFF OF.**