Sleeves for Bilstein Shocks for the rear axle on a VW Pickup (Caddy)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These sleeves can be used to modify Bilstein rear shocks for a Volvo 760 (p/n: FA-B46-0296-H2 or 24-002967) to fit the…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These sleeves can be used to modify Bilstein rear shocks for a Volvo 760 (p/n: FA-B46-0296-H2 or 24-002967) to fit the VW pickup rear axle. Bilstein never made a specific shock for the rear of the VW pickup, but they do make some strut inserts for the front suspension. Since the Volvo sedan is of a similar weight to the pickup as well as the shocks being similar dimensions, this shock makes a good match to Bilstein strut inserts up front.
The Volvo sleeves are wider than the shock bushings and are a larger 12mm ID. The VW sleeves need to be just the width of the bushing (30mm) and 10mm ID. You can make them out of steel or aluminum tubing, cut to length and drilled to fit the VW shock mounting bolts. For example, 1/2" OD x 0.08" wall tubing works well, drill ID to 10mm: https://amzn.to/4muXxfl Or use some 10mm ID tubing of 12-14mm OD.
There is an install tool that you can use to press out the Volvo sleeve while inserting the VW sleeve. This tool could likely be 3D printed, or it's easy to machine out of a piece of rod stock.
Bilstein 24-002967 https://amzn.to/4iubwiA
More information on the web page: https://www.4crawler.com/Diesel/CheapTricks/RearSuspension.shtml#Shocks
Photos:
- Shock, insertion tool along with VW and Volvo sleeves and a tall socket to press the Volvo sleeve into
- Insertion tool with Volvo sleeve on one side, VW sleeve on the other side and the socket
- Using the insertion tool to press the Volvo sleeve out and insert the VW sleeve in one step
Another option is to cut the Volvo sleeves flush with the shock bushing and then insert a 12mm OD x 10mm ID sleeve or 3D printed spacer inside to fill up the gap to the 10mm shock bolt.
YouTube Video
https://youtu.be/Lm_VmUB3tJY?si=JGIoockby0xb2T7e
Adapting Bilstein Shocks for the VW Pickup Rear Suspension
Category: Automotive
