Foscam Ball Camera Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collection of useful mounts for Foscam Ball Cameras for a specific application, but sharable
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
Built for a project that needs to set Foscam ball camera's to look through windows, mounting them on the "safe for humans" side of the “window” sill. Usually screwed to ¾ inch wooden or plastic trim. Every install is a little different. These are two sharable variants. One has a hole for the came through the top and a cover for the hole and holes for tie wraps for the cable.
There are mounting holes at 5mm increments to try to get the camera as close to the glass as possible. These are also useful at other angles.
Printed in “design white” PLA with 15% infill and 4 vertical shells. Surprisingly stiff.