Dishwashing soap holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dish washing soap holder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
This dish washing liquid bottle holder will hold your bottle on the wall. Flip the bottle upside down to get some liquid out, or pull the bottle out to put liquid in a pot for example.
In addition to the printed parts you will need two screws and wall anchors, two 10x2mm magnets and 4x5 magnets. You will need to shove the cap of your bottle in the plate too. Mine fits tight enough to not necessitate glue, but you might need some depending on your cap.
Print everything, screw the mount on the wall, insert the magnets in the corresponding holes. Insert the rotating plate in the mount by bending the parts.
It will look scary at first but I have assembled and disassembled mine at least four times. It was not necessarily easy but nothing broke.
The big magnets hold the sliding plate into the rotation one. The small magnets ensure that the rotating plate stays horizontal while waiting for you to put the bottle back in the rack.