1 / 1
Motor focus for Sigma APO 70-300mm lens (Ardufocus, 28BYJ-48) — zdjęcie 1

Motor focus for Sigma APO 70-300mm lens (Ardufocus, 28BYJ-48)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ardufocus based motor focus assembly for the Sigma APO 70-300mm lens. Main use is for astronomical imaging.

Ocena
0 / 5
Polubienia
7
Pobrania
47
Wydruki
0
Wyświetlenia
779
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The motor is a 28BYJ-48, driven by a ULN2003 and Arduino Nano. I use the 5V version of the motor, which can be powered over USB - the mechanical load is minimal.

I use an inverted GT2 belt glued to the focuser of the Sigma lens. I recommend to use a metal pulley on the motor (although a printed one should work). The required travel range is minimal (2-3mm) so I use this rather bulky belt-coupler for the driving belt:

https://www.thingiverse.com/thing:40710

All screws and nuts are M3.

Some finishing touches are missing (like a top-cover for the lens assembly). I will add them in due time.

Tagi