modular holder for Litheli batteries
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
modular holder for Litheli batteries
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 217
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
modular holder for Litheli batteries
I have only four batteries from Litheli at the moment, so the original model from @RiccardoDuri_1470429stackable is too big.
But I like the idea, so I have adapted the original for my needs.
Modular holder for Litheli batteries with mounting position top or bottom.
Can be mounted on the underside of a shelf, for example, or upside down inside the shelf.
For fastening there are three holes for countersunk head screws (4mm) in the mounting plate, or depending on where the part is mounted, adhesive tape may also be sufficient.
Friction fitting the parts together is somewhat impractical, once the parts are connected, they can hardly or not be taken apart again. That's why I opted for a slightly looser connection.
The first variant is screwed together with M3 countersunk head screws (or self-tapping screws) with a minimum length of 12mm (better 14-16 mm).
The second version has no holes for a cleaner look and is only held together with a small strip of thin double-sided adhesive tape on the bevelled edge. That is secure enough to hold the parts together when removing a battery.
( In my opinion a snapfit version would be a bit over engineered, but maybe there will be one in the future)
included STEP files to easy modify
happy printing, have fun!
IF THERE ARE ISSUES WITH THE DESIGN PLEASE LEAVE A COMMENT OR SEND ME A MESSAGE