Amiga DeMoN (Action Replay 5) - Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Amiga DeMoN cartridge (Action Replay 5)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 167
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
This is a cartridge case that I have designed for use with the DeMoN cartridge. It is based on an earlier design of mine for the replica Action Replay 3 cartridge.
The case prints cleanly without supports. Placing supports in the screw holes of the bottom case part is optional.
There is a three-color version that includes a logo print for printers with multi-material systems. Although the logo has fine structures, it prints well with a 0.4 mm nozzle. For the best quality choose a 0.2 mm nozzle. The case on the images was printed with a 0.4 mm nozzle.
In addition to the printed parts, you'll need the following:
- 4x M3 threaded inserts (I use these)
- 4x M3x10 screws
Furthermore, I recommend using jumpers with pull tabs so that the cartridge configuration can be easily changed.
The case is designed for the exact parts that are listed in the official BOM. Depending on your choice of buttons, switches and potentiometers, you may need different hole sizes. Therefore, I have included the STEP files so that you can make adjustments in the CAD tool of your choice.
Be sure to bend both electrolytic capacitors down so that they lie flat on the board. You need a low profile to be able to close the case. Pay special attention to C1, it must be bent to the left, otherwise it will interfere with a fin on the top shell. Please refer to this picture:
If you have trouble closing the case, make sure that the leads on the bottom side of the PCB are trimmed short enough.